Ceramic Fiber Boards in Vacuum Furnaces: Hot Face vs. Back-Up
Ceramic Fiber Boards in Vacuum Furnaces: Hot Face vs. Back-Up
Designing insulation for a vacuum furnace requires careful consideration of heat transfer and outgassing. In high-vacuum environments, heat transfer occurs primarily through radiation, and the choice of insulation material changes significantly compared to air-filled furnaces.
While graphite and carbon felts are commonly used for the hottest zones, pressed ceramic fiber boards still play a crucial role in specific areas of the vacuum furnace.
The Limitation of Ceramic Fiber in Vacuum
In a vacuum, the lack of gas molecules means that standard convection does not occur. Ceramic fiber boards rely on trapped air in their porous structure for optimal insulation. Therefore, in a high-vacuum environment, the thermal conductivity of ceramic fiber increases. Additionally, typical organic binders used in boards can outgas heavily under vacuum, contaminating the load.
Where Ceramic Fiber Boards Are Used
- Back-Up Insulation: For furnaces operating up to 1600°C, high-density pressed alumina boards are often used as an outer back-up layer behind a graphite or molybdenum hot face. They provide structural rigidity and additional thermal resistance.
- Cold Zones and Transition Zones: Near the furnace doors, feedthroughs, and cooling zones, temperatures drop below 1200°C. Here, pressed ceramic fiber boards are highly effective for insulating the vessel walls without the risk of electrical shorting associated with graphite.
Selection Criteria
For vacuum applications, it is essential to use high-purity, high-density boards. Our 1800°C alumina fiber boards are pressed to a high density (e.g., 400-500 kg/m³), which reduces porosity and minimizes outgassing potential. They can be CNC machined to fit precisely around the heating elements and thermal shields, ensuring a perfect thermal seal.


