Custom Ceramic Fiber Solutions for High-Temperature Furnaces Boards | Modules | Custom Chambers | Crucibles

Home / All / Selection Guide / How to Choose Anchoring Systems for Ceramic Fiber Modules

How to Choose Anchoring Systems for Ceramic Fiber Modules

Nov 11,2026

How to Choose Anchoring Systems for Ceramic Fiber Modules

Ceramic fiber modules are the preferred choice for furnace roofs and large walls because they compensate for thermal shrinkage. However, the performance of a module is only as good as the anchoring system holding it in place. If the anchor fails, the module drops, exposing the steel shell to extreme heat.

Choosing the correct anchor material is critical for furnace engineers. It is not simply about matching the anchor's melting point to the furnace temperature; it is about understanding the temperature gradient inside the lining.

The Standard Configuration: SS304 vs. SS310

In most industrial furnace applications, two types of stainless steel anchors are used based on the module's temperature grade:

  • 1260°C and 1430°C Modules (Using SS304): For standard high-alumina and zirconia-containing modules, SS304 anchors are the industry standard. Because the anchor is embedded deep within the module (away from the hot face), the actual temperature at the anchor's location is significantly lower than the furnace chamber's operating temperature. SS304 provides excellent mechanical strength and oxidation resistance at a highly cost-effective price point for these applications.
  • 1600°C Modules (Using SS310): When using ultra-high-temperature polycrystalline mullite modules, the thermal gradient still results in higher temperatures reaching the anchor depth. In this case, SS310 anchors are required. SS310 offers superior high-temperature oxidation resistance and creep strength, ensuring the anchor does not degrade under the more intense thermal load.

Anchor Design and Installation Tips

Beyond the material selection, proper anchor design ensures a secure lining:

  • V-Shape or U-Shape: These shapes provide a better grip when the module is compressed onto it, ensuring the module stays firmly attached to the shell.
  • Welding Quality: The weld between the anchor and the steel shell is the foundation of the entire lining. It must be continuous and secure.
  • Pre-Fitted at the Factory: For furnace builders, installing anchors on-site is time-consuming. We supply modules with SS304 or SS310 anchors pre-fitted and pre-compressed at the factory. This guarantees perfect alignment and allows for faster, safer installation by your construction team.

Conclusion

Selecting the right anchor is a matter of matching the anchor material to the module's temperature grade: SS304 for 1260°C and 1430°C, and SS310 for 1600°C. By ensuring the correct anchor is used, you guarantee that your ceramic fiber modules will provide reliable, long-term insulation for your furnace.

Are you planning a furnace relining or new furnace project?

We provide free technical support and customized insulation solutions. Contact us for a free selection recommendation within 24 hours.

Let's Innovate Together

We have a dedicated team ready to help you with your most challenging projects. Whether you need a custom furnace chamber, a complex shape, or simply expert advice — contact us today. We're ready for the challenge.

Contact Now